Subaru Legacy 2005 Service Manual page 3704

SEAT BELT SYSTEM
6. Rear Seat Belt
A: REMOVAL
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (SEDAN MODEL)
1) Remove the rear seat. <Ref. to SE-14, REMOV-
AL, Rear Seat.>
2) Remove the seat belt lower anchor bolt.
3) Remove the rear quarter trim. <Ref. to EI-63,
SEDAN MODEL (MODEL WITH CURTAIN AIR-
BAG), REMOVAL, Rear Quarter Trim.>
4) Remove the bolts, and then detach the outer
seat belt assembly.
2. SHOULDER SEAT BELT CTR ASSEM-
BLY (SEDAN MODEL)
1) Remove the rear seat cushion. <Ref. to SE-14,
REMOVAL, Rear Seat.>
2) Remove the seat belt lower anchor bolt.
NOTE:
For models with rear seat belt warning light, discon-
nect the seat belt warning light connector.
Rear Seat Belt
3) Remove the rear quarter trim. <Ref. to EI-63,
REMOVAL, Rear Quarter Trim.>
4) Remove the rear shelf trim. <Ref. to EI-70, RE-
MOVAL, Rear Shelf Trim.>
5) Remove the bolts, and then detach the shoulder
seat belt assembly.
3. CENTER SEAT BELT LH ASSEMBLY
(SEDAN MODEL)
SB-00084
1) Remove the rear seat cushion. <Ref. to SE-14,
REMOVAL, Rear Seat.>
2) Remove the bolts, and then detach the center
seat belt LH assembly.
SB-00089
NOTE:
For models with rear seat belt warning light, discon-
nect the seat belt warning light connector.
SB-00149
SB-16
SB-00089
SB-00150