Subaru Legacy 2005 Service Manual page 4015

26.Rear Quarter Trim
A: REMOVAL
1. SEDAN MODEL (MODEL WITHOUT
CURTAIN AIRBAG)
1) Remove the rear seat. <Ref. to SE-14, SEDAN
MODEL, REMOVAL, Rear Seat.>
2) Remove rear quarter trim.
2. SEDAN MODEL (MODEL WITH CURTAIN
AIRBAG)
1) Remove the rear seat. <Ref. to SE-14, SEDAN
MODEL, REMOVAL, Rear Seat.>
2) Turn over the trim, and remove the quarter trim
rear by pressing the claw (A) of metal clip using flat
tip screwdriver or the like.
:(B)
(B) Hook
CAUTION:
When the metal clip has been removed or dam-
aged, replace both of the trim and metal clips
with new ones.
Rear Quarter Trim
3) Remove the cap on the upper side of trim, and
remove the bolt inside.
4) Remove the bolts (A), and remove the quarter
trim (front).
EI-00838
3. WAGON MODEL
1) Remove the rear seat cushion and backrest
shoulder. <Ref. to SE-14, WAGON MODEL, RE-
MOVAL, Rear Seat.>
2) Remove the cap on the upper side of pillar trim,
and remove the bolt inside. (Model with curtain air-
bag)
(A)
EI-00682
EI-63
EXTERIOR/INTERIOR TRIM
EI-00562
(A)
(A)
EI-00839
EI-00562