Table of Contents
Advertisement
11) Disconnect the pipe C from pressure hose first,
and pipe D from return hose second.
(1) Pipe C
(2) Pipe D
(3) Pressure hose
(4) Return hose
12) Remove the clamp bolts securing gearbox to
crossmember, and remove the clamp.
(1) Clamp
Steering Gearbox [LHD Model]
(4)
(3)
(2)
(1)
PS-00538
(1)
PS-00554
POWER ASSISTED SYSTEM (POWER STEERING)
13) Remove the bolts which secure gearbox brack-
et, and remove the bracket and gearbox.
(1) Bracket
B: INSTALLATION
1) Insert the gearbox into crossmember, being
careful not to damage gearbox boot.
2) Install the gearbox and bracket. Tighten the bolt
temporarily.
(1) Bracket
3) Tighten the gearbox to the crossmember bracket
via clamp with bolt temporarily.
(1) Clamp
4) Tighten the bolts which temporary tightening the
clamp and bracket of gearbox to specified torque.
Tightening torque:
⋅
60 N
m (6.1 kgf-m, 44.1 ft-lb)
PS-27
(1)
PS-00555
(1)
PS-00555
(1)
PS-00554
Advertisement
Chapters
Table of Contents
