Subaru Legacy 2005 Service Manual page 4156

Read Current Data
LAN SYSTEM (DIAGNOSTICS)
9. Read Current Data
A: OPERATION
1) On the "Main Menu" display screen, select the
{Each System Check} and press the [YES] key.
2) On the "System Selection Menu" display screen,
select the {Integ. unit mode} and press the [YES]
key.
3) On the "Integ. unit mode failure diag" display
screen, select the {Current Data Display & Save}
and press the [YES] key.
4) On the "Data Display Menu" screen, select the
{12 Data Display} and press the [YES] key.
5) Using the scroll key, scroll the display screen up
or down until the desired data is shown.
<Ref. to LAN(diag)-15, DISPLAY OF ANALOG DA-
TA, OPERATION, Subaru Select Monitor.> <Ref.
to LAN(diag)-16, DISPLAY OF ON/OFF DATA,
OPERATION, Subaru Select Monitor.> <Ref. to
LAN(diag)-17, CONFIRMATION OF CURRENT
SETTING, OPERATION, Subaru Select Monitor.>
LAN(diag)-26