14.Trunk Lid Lock Assembly
A: REMOVAL
1. MODEL WITHOUT DOUBLE LOCK
1) Disconnect the connectors and remove the ca-
ble of trunk opener.
2) Remove the two bolts to remove trunk lid lock
assembly.
2. MODEL WITH DOUBLE LOCK
1) Disconnect the connectors and remove the ca-
ble of trunk opener.
2) Remove the two bolts and clip to remove trunk
lid lock assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Apply grease to the movable part.
• Make sure the lock works correctly after installa-
tion.
Trunk Lid Lock Assembly
C: INSPECTION
1) Disconnect the trunk lid actuator harness con-
nector.
2) Connect the battery to trunk lid actuator termi-
nals.
SL-00243
If defective, replace the trunk lid actuator.
3) Check the striker for deformation or abnormal
wear.
4) Check the safety lever for improper movement.
5) Check other levers and the spring for rust forma-
tion and unsmooth movement.
6) Check the cable of trunk opener for smooth op-
eration.
SL-00308
SL-37
Terminal No.
No. 2 (+) and No. 1 (−)
SECURITY AND LOCKS
3 2 1
SL-00255
Actuator operation
Locked → Unlocked