Subaru Legacy 2005 Service Manual page 3371

11) Using a snap ring pliers, remove the snap ring,
valve, oil seal and back-up washer.
CAUTION:
Be careful not to scratch pinion and valve as-
sembly.
(3)
(2)
(1)
(1) Snap ring
(2) Valve
(3) Oil seal
(4) Back-up ring
D: ASSEMBLY
1. RACK HOUSING ASSEMBLY
1) Using a press, install the bushing to gearbox in-
stallation portion.
2) Insert the ST to rack.
ST 34199AG040 GUIDE (3.0 R model)
ST 34199AG030 GUIDE (Except for 3.0 R mod-
el)
ST
(1) Seal ring
(2) Rack
Steering Gearbox [LHD Model]
(4)
PS-00518
PS-00519
(1)
(2)
PS-00520
POWER ASSISTED SYSTEM (POWER STEERING)
3) Install the seal ring to piston portion of rack.
(1) Using the ST, form the seal ring properly.
ST1 34199AG080 FORMER PISTON
ST2 34199AG060 GUIDE G (26) (3.0 R model)
ST2 34199AG050 GUIDE G (24) (Except for 3.0
ST2
(1) Seal ring
(2) Rack
(2) Using the ST-B and ST-C, install the oil seal
to ST-A.
ST 34199FE040 INSTALLER A, B, C (3.0 R
ST 927490000
NOTE:
Face the oil seal in the direction as shown in the fig-
ure.
ST C
(A) Oil seal
PS-33
R model)
(1)
(2)
ST1
PS-00559
model)
INSTALLER A, B, C (Except
for 3.0 R model)
ST A
ST B
(A)
PS-00075