Subaru Legacy 2005 Service Manual page 3906

Hide thumbs Also See for Legacy 2005:
Table of Contents

Advertisement

SECURITY AND LOCKS
5. CHECK BODY INTEGRATED MODULE POWER SUPPLY, GROUND CIRCUIT AND REGIS-
TERED CONNECTOR CIRCUIT
Step
1
CHECK REGISTRATION CONNECTOR IN-
PUT VOLTAGE.
Measure the voltage between the body inte-
grated module harness connector and chassis
ground.
Connector & terminal
(B281) No. 22 (+) — Chassis ground (
2
CHECK POWER SUPPLY OF BODY INTE-
GRATED MODULE.
1) Disconnect the harness connector of body
integrated module.
2) Measure the voltage between the harness
connector terminal and chassis ground.
Connector & terminal
(B280) No. 7 (+) — Chassis ground (
(B281) No. 2 (+) — Chassis ground (
3
CHECK BODY INTEGRATED MODULE
GROUND CIRCUIT.
1) Disconnect the harness connector of body
integrated module.
2) Measure the resistance between the har-
ness connector terminal and chassis ground.
Connector & terminal
(B280) No. 22 — Chassis ground:
(B281) No. 8 — Chassis ground:
(B281) No. 9 — Chassis ground:
6. CHECK REGISTRATION CONNECTOR.
Step
1
CHECK REGISTRATION CONNECTOR IN-
PUT VOLTAGE.
1) Disconnect the registration connector.
2) Measure the voltage between the body
integrated module harness connector and
chassis ground.
Connector & terminal
(B281) No. 22 (+) — Chassis ground (
2
CHECK REGISTRATION CONNECTOR IN-
PUT VOLTAGE.
1) Connect the registration connector.
2) Measure the voltage between the body
integrated module harness connector and
chassis ground.
Connector & terminal
(B281) No. 22 (+) — Chassis ground (
Keyless Entry System
Check
Is the voltage more than 10 V? Go to step 2.
):
Is the voltage more than 10 V? Go to step 3.
):
):
Is the resistance less than 10
Ω?
Check
Is the voltage more than 10 V? Go to step 2.
):
Is the voltage 0 V?
):
SL-20
Yes
Check the registra-
tion connector for
disconnection, and
the harness for
short.
Check the harness
for open or short
between body inte-
grated module and
fuse.
Check the body
Repair the har-
integrated mod-
ness.
ule. <Ref. to
LAN(diag)-2, Basic
Diagnostic Proce-
dure.>
Yes
Repair the har-
ness.
Registration con-
Repair the har-
nector circuit is
ness.
OK.
No
No

Advertisement

Table of Contents
loading

Table of Contents