BRAKE
• When the pad return spring is deformed or
damaged, replace the brake pad with new one.
(1) Pad return spring
(2) Supporting surface of pad clip
(3) Brake rotor rotation direction
5) Install the caliper body on support.
Tightening torque:
⋅
27 N
m (2.8 kgf-m, 19.9 ft-lb)
C: INSPECTION
1. 15-INCH TYPE
Check the pad thickness A.
A
Pad thickness
Specification
mm (in) Wear limit
NOTE:
• Always replace the pads for both wheels LH and
RH as a set.
• Also replace pad clips if they are twisted or worn.
• Replace the pad if there is oil or grease on it.
2. 16-INCH TYPE
Refer to 15-inch type. <Ref. to BR-18, 15-INCH
TYPE, INSPECTION, Front Brake Pad.>
Front Brake Pad
(1)
(2)
(3)
BR-00483
BR-00360
11 (0.43)
1.5 (0.059)
3. 17-INCH TYPE
Check the pad thickness A.
Pad thickness
mm (in) Wear limit
NOTE:
• Always replace the pads for both wheels LH and
RH as a set.
• Replace the pad if there is oil or grease on it.
BR-18
A
Specification
11 (0.43)
1.5 (0.059)
BR-00360