Subaru Legacy 2005 Service Manual page 3813

4. Front Door Glass
A: REMOVAL
1) Remove the front door trim. <Ref. to EI-48, RE-
MOVAL, Door Trim.>
2) Remove the sealing cover. <Ref. to EB-20, RE-
MOVAL, Front Sealing Cover.>
3) Remove the outer mirror assembly. <Ref. to
GW-19, REMOVAL, Outer Mirror Assembly.>
4) Remove the clip (A), and remove the front end of
weather strip.
5) Remove the gusset.
Front Door Glass
(A)
GW-00261
GW-00262
GW-11
GLASS/WINDOWS/MIRRORS
6) Remove the stabilizer.
7) Remove the clips (A), and remove the rear end
of weather strip.
8) Remove the screw (A) from the rear end of
weather strip outer to remove weather strip outer.
9) Remove the screws to remove guide assembly.
10) Operate the power window switch to move the
glass to the position shown in the figure, and then
remove the two nuts through service holes.
GW-00263
(A)
GW-00264
(A)
GW-00265
GW-00266