Table of Contents
Advertisement
Curtain Airbag Sensor
AIRBAG SYSTEM
10.Curtain Airbag Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the rear seat. <Ref. to SE-14, REMOV-
AL, Rear Seat.>
4) Remove the nut and disconnect the airbag con-
nector to remove the curtain airbag sensor.
AB-00727
B: INSTALLATION
CAUTION:
• Do not reuse the bolt and nut
• Always use new bolts and nuts for them.
Install in the reverse order of removal.
Tightening torque:
⋅
7.4 N
m (0.75 kgf-m, 5.5 ft-lb)
C: INSPECTION
Perform the inspection of the following items, and
replace the damaged parts with new ones.
• Mounting bracket or connector of curtain airbag
sensor is damaged.
• Curtain airbag is deployed.
AB-24
Advertisement
Chapters
Table of Contents
