LIGHTING SYSTEM
17.Front Fog Light Bulb
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the two clips, and then turn over the
lower mud guard.
3) Disconnect the harness connector.
4) Remove the back cover.
5) Remove the spring retainer then detach the fog
light bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
Front Fog Light Bulb
LI-00288
LI-00291
LI-22