Table of Contents
Advertisement
2. PARKING BRAKE CABLE
T1
(1)
T1
(1)
Parking brake lever
(2)
Parking brake switch
(3)
Adjusting nut (Self-locking nut)
(4)
Equalizer
(5)
Bracket
C: CAUTION
• Wear work clothing, including a cap, protective
goggles, and protective shoes during operation.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Use SUBARU genuine grease etc. or the equiv-
alent. Do not mix grease etc. with that of another
grade or from other manufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before securing a part on a vice, place cushion-
ing material such as wood blocks, aluminum plate,
or shop cloth between the part and the vice.
• Keep grease etc. away from parking brake
shoes.
General Description
(8)
(7)
T1
(6)
(3)
(5)
(4)
(2)
T1
(6)
Clamp
(7)
Parking brake cable RH
(8)
Clamp
(9)
Parking brake cable LH
T2
T1
T1
T1
Tightening torque: N
PB-3
PARKING BRAKE
(8)
T2
(9)
⋅
m (kgf-m, ft-lb)
T1: 18 (1.8, 13)
T2: 33 (3.4, 24.3)
PB-00113
Advertisement
Chapters
Table of Contents
