Subaru Legacy 2005 Service Manual page 3392

POWER ASSISTED SYSTEM (POWER STEERING)
18) Remove the oil seal using ST and press from
plug.
ST 34199AE100 OIL SEAL PLUG REMOVER
NOTE:
Do not apply force on the plug edge surface.
(1) Oil seal
(2) O-ring
19) Set the ST in the dimension as shown in the fig-
ure.
ST 34199AE120 GEARBOX OIL SEAL RE-
MOVER
(1) 70 mm (2.76 in)
Steering Gearbox [RHD Model]
PS-00068
PS-00069
PS-54
20) Set the stopper to gearbox, and then insert the
tip of ST to gearbox.
(1) Stopper
(2) Oil seal
21) By fixing the 2-surface width, press-in by rotat-
ing the rod and attach to oil seal.
(1) Rod
(2) 2-surface width
PS-00070
PS-00071