24.Back-up Light Bulb
A: REMOVAL
1. SEDAN MODEL
1) Remove the bulb inspection cover of trunk side
trim.
2) Turn the socket and remove the bulb.
2. WAGON MODEL
1) Remove the bulb inspection cover of rear gate
trim.
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
Back-up Light Bulb
LI-00304
LI-00305
LI-29
LIGHTING SYSTEM