Tightening torque:
⋅
37.3 N
m (3.8 kgf-m, 27.5 ft-lb)
2) Tighten the bolts which install power steering
pump bracket.
Tightening torque:
<Ref. to PS-9, OIL PUMP, COMPONENT, Gen-
eral Description.>
3) Connect the pressure hose and suction hose
each other.
Tightening torque:
Eye bolt
⋅
39 N
m (4.0 kgf-m, 28.9 ft-lb)
CAUTION:
If a hose is twisted at this step, take care the
hose may come into contact with some other
parts.
(1)
(2)
(1) Suction hose
(2) Pressure hose
4) Connect the connector to power steering oil
pressure switch.
Oil Pump
POWER ASSISTED SYSTEM (POWER STEERING)
5) Install the tensioner adjuster.
6) Install the V-belts.
7) Install the cover of pully belt.
8) Connect the battery ground cable to battery.
9) Pour the specified power steering fluid. <Ref. to
PS-91, Power Steering Fluid.>
CAUTION:
Never start the engine before feeding the fluid;
otherwise vane pump might be seized up.
PS-00702
PS-00701
PS-00700
PS-85