Table of Contents
Advertisement
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
Step
9
CHECK VDCCM&H/U.
1) Turn the ignition switch to OFF.
2) Connect all the connectors.
3) Perform the clear memory mode.
4) Perform the inspection mode.
5) Read the DTC.
10
CHECK OTHER DTC DETECTION.
Check
Is the same DTC displayed?
Is any other DTC displayed?
VDC(diag)-114
Yes
Replace the
Go to step 10.
VDCCM&H/U.
<Ref. to VDC-7,
VDC Control Mod-
ule and Hydraulic
Control Unit
(VDCCM&H/U).>
Perform the diag-
Temporary poor
nosis according to
contact occurs.
DTC.
No
Advertisement
Chapters
Table of Contents
