11. Remove the Oetiker circle clamp and disconnect the inlet hose from the inlet
fitting at the bottom of the water tank.
12. Lift the water tank up and out the top of the machine.
To re-install the hot water tank, follow these same instructions in the reverse
order.
Removing the Heater Element
Removing the Thermal Cut-Off Switch
With the water tank removed from the machine, remove the water tank lid retaining
bracket. This allows you to open the water tank should the heater element or the
thermal cut-off switch need to be replaced.
July 15, 2015
Eccellenza Express – Service Manual
43