Table of Contents
Advertisement
Removing the Brewer Motor
1.
Remove the brewer assembly.
2.
With the rear panel removed, disconnect the wiring harness from the brewer motor.
3.
Loosen the two upper screws and remove the two lower screws.
4.
From the front, lift and pull the brewer motor out of the machine.
The brewer motor comes as a complete assembly. There are no spare parts
available therefore this motor cannot be serviced.
To install the brewer motor, follow these same instructions in the reverse order.
VKI Publication #100309-001
Eccellenza Touch
29
Hide quick links:
Advertisement
Table of Contents
