12. COORDINATE MEASUREMENT
By performing coordinate measurements it is possible to find the 3-dimensional
coordinates of the target based on station point coordinates, instrument height,
target height, and azimuth angles of the backsight station which are entered in
advance.
• EDM setting can be done in coordinate measurement menu.
Setting items: "24.1 Changing Instrument Options
12.1
Entering Instrument Station Data
Before coordinate measurement, enter instrument station coordinates, the
instrument height, and target height.
PROCEDURE
1. First measure the target height
and instrument height with a tape
measure, etc.
2. Press [COORD] in the first page
of the Meas mode screen to
display <Coord.>
44
EDM settings"