Programme Digi / Sms; Programming Fast Format; Adding A Pause - Pyronix PCX-256 Programming Manual

PCX 256 PROGRAMMING MANUAL
5 . 2 3 P r o g r a m m e D I G I / S M S ?
The PCX system can be used to dial to an Alarm Receiving Centre or send SMS texts to a mobile
phone.

5.23.1 Programming Fast Format

The Fast Format type 4.8.1 is selected as default for the digi. Up to four numbers can be
programmed, each with individual account numbers, channel information and back up telephone
number option. The channels can be individually programmed in the "Program Digi Channels"
section. Each channel uses a programmable output number. The default values are described on
below:
DIGI CHANNELS
Digi Channel 1
Digi Channel 2
Digi Channel 3
Digi Channel 4
Digi Channel 5
The communicator "status channel" (channel 0) is used for low voltage and test calls.

5.23.2 Adding a Pause

For a 2 second pause after a telephone number digit, press the
'comma' symbol (','). This is usually used if a '9' is needed before the telephone number.

Programme Digi / SMS

Using the and
'PROGRAMME DIGI/SMS' Press the
To 'Program Digi / SMS Calls' will be displayed,
to program in an ARC number, press the
Disable Digi/SMS
Enter : for No (Enables the Digi Modem)
Enter : for Yes (Default) Press the
Use the numeric keys to select the ARC details
to program. Press the
Active
Enter : for No (Default)
Enter : for Yes (Enables the ARC Details)
Press the key
Page: 58
PGMs
Fire (0001)
HU Device Any (0009)
Unconfirmed Any (0018)
Final Arm Any (0022)
Tamper Any (0007)
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e
P R O G R A M M E D I G I / S M S
F a s t F o r m a t 8 C h a n n e l
keys, scroll to
key
DIGI CHANNELS
Digi Channel 6
Digi Channel 7
Digi Channel 8
Digi Channel 9
Digi Channel 10
key
key
key.
PGMs
Confirmed Any (0006)
Omit Rearm Any (0017)
AC Fail (0052)
Global Fault 2 (0056)
Test ATS (0064)
key until you reach the
RINS868-6