Pyronix PCX-256 Programming Manual page 64

SMS
Enter the mobile number. Press the
Select the partitions that you wish to be used.
NOTE: The primary partitions are A, B, C & D.
Press the key.
Stop on Success (For Content ID and SIA)
Enter : for No. Enter
Press the key. Repeat for Partition Accounts
if applicable, press the
ARC Account (For Content ID and SIA)
Use the numeric keys to program the account
number of the central station (this will be given to
you by your ARC). Press the
Note: If partition accounts have been enabled in
the previous option then you will have to assign a
different account code for each partition.
Using the numeric keys select the content types
you would like to use. Please see page: 60 for
the different types. Press the
Repeat for contents 17-32. Press the
Select the number of redials you require (0-15).
Press the key. Repeat for the Time Out (The
time that the panel will wait for a reply). Press the
key.
Test Calls
Enter : for No. (Default) Enter
Timed (If Timed is chosen you will need to enter
the hours and minutes – press the
Press the key. ARC Details will be
displayed. Repeat the above for any other ARC
stations you are using. Press the
'Program Digi/SMS Calls?' will be displayed,
press the key. 'Program Digi Channels' will
be displayed and Press the
SMS Details' will be displayed and Press the
key.
Account Ref
Enter an account reference if required (and the
'NN' for PABX Systems). Press the
Manufacturer Access will be displayed
If you require access to this please contact
Customer Support.
RINS868-6
key.
: for Yes
key
key.
key.
key.
: for
key).
key.
key. 'Program
key.
PCX 256 PROGRAMMING MANUAL
Page: 63