Access Control - Pyronix PCX-256 Programming Manual

5.7.5 Access Control

The following programming shows how to set up the Access Control facility if you are using it. Also
the same programming process applies to 'Entry Control' which allows a tag reader to control an
entry point.
Assign Keypads/Readers
Using the and
KEYPADS/READERS?'
Press the key
Address
Enter the address of the keypad/reader you wish
to assign. Press the
Type
Enter : for Reader
Press the key
Reader Is
Enter : for Access Control
Press the key
Enter the Lock Open Time (max: 250 seconds).
This is the time the door release is going to be
active when a valid tag's presented.
Press the key.
Enter the Door Open Time (max: 250 seconds).
This is the time the door is allowed to be open
before triggering an alarm.
Press the key.
RINS868-6
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e
A S S I G N K E Y P A D S / R E A D E R S
A c c e s s C o n t r o l
keys, scroll to 'ASSIGN
key
PCX 256 PROGRAMMING MANUAL
Page: 25