Wi-Fi Set Up; Sms/Voice Phonebook - Pyronix RINS1902-2 User Manual

14.9 Wi-Fi Set Up

If a Wi-Fi module is connected to your system, the SSID and Password will need to be set up in
this function.
Press b or A to scroll to 'WI-FI
I
SETUP'. Press
To enable the Wi-Fi module, to be
enabled with your router, press I.
(Or press A to enter the details
manually)
On your device, search for the Wi-Fi
signals.
Click 'Pyronix' and enter the password
as shown on the display of the
Wireless Alarm System.
Open a web browser.
The SSID of your router should be
displayed on the left hand side. Select
it, and wait for display on the Wireless
Alarm System to show 'Connected to
the network'.
Your Wi-Fi module is now connected
to your router.
Close the web page and access to any
internet page will be resumed.

14.10 SMS/Voice Phonebook

If SMS texting or voice messages are programmed, there can be up to 10 mobile numbers
programmed which can be changed in this function. If 'do not use' is shown on the display of a
number, then a telephone number already exists that is communicating to an Alarm Receiving
Centre (this can only be changed by your engineer).
Press b or A to scroll to
'PHONEBOOK'. Press
Press b or D to scroll through the
different telephone numbers.
Wireless Alarm System: User Manual
.
I
.
Wi-Fi SETUP?
Setup with Wi-Fi
Device?
SMS PHONEBOOK
SMS Numbers
23
[01]