Pabx Systems (Only Relevant To Sms) - Pyronix PCX-256 Programming Manual

17 SL SwitchOn
18 SL SwitchOff
19 SL OtherOn
20 SL OtherOff
21 Sub-partitions Set
22 Sub-partitions Unset
23 Sub-partitions Alarm
24 Input Omitted
25 Input Restore
26 Test Call
27 Mains fail
28 Emergency input
29 Emergency Restore
30 Tamper input
31 First Tamper input
32 Tamp Input Restore

5.23.4 PABX Systems (Only relevant to SMS)

Please note for PABX telephone systems (where a "9" is needed in order to dial an outside line),
you must put "NN" before the account number in the "account reference" part of the programming
(see below). If you haven't been given an account number then the account reference "NN1111"
would be OK to use. This needs to be entered on the keypad.
RINS868-6
*Switcher input active
*Switcher input
restored
*Other input active
*Other input restored
Arming events for sub-partitions
Disarming events for sub-partitions
Alarm event in a sub-partition
Input omitted at rearm.
Restore of type 05
Do not Use
Mains fail/restore
Fire, Gas, HU, 2-key HU, Duress Code used
Restore of Fire, Gas, HU.
Tamper, Day alarm, and Trouble input types. Tamper on input, case
tamper and SAB tamper.
First to alarm of tamper input.
Restore of a tamper.
PCX 256 PROGRAMMING MANUAL
* - Signalled ONLY for inputs with 'Special
Logged' attribute.
Page: 61