Sms Phonebook; Walk Test - Pyronix EURO 46 V10 User Manual

SMS Phonebook

If SMS text is programmed, there can be up to 10 mobile numbers also programmed which
can be changed in this function. If "do not use" is shown on the display of a number, then a telephone
number already exists that is communicating to an Alarm Receiving Centre (this can only be changed
by your engineer).
Press b or h to scroll to 'SMS PHONEBOOK'.
Press f.
Press b or d to scroll through the different
telephone numbers. Press f.
Enter the mobile number. Press f.
Press b or d to enable or disable the number.
Press f.

Walk Test

The 'Walk Test' function allows the testing of all programmed inputs on the alarm system.
Press b or h to scroll to 'WALK TEST'. Press
f.
Select which level/area to walk test. Press f to
walk test all inputs or press the h to walk test an
individual input.
PLEASE NOTE: Only select one area to walk test at
a time.
Walk test the inputs scrolling on the display. After all
inputs have been walk tested successfully 'Walk Test
Completed' will be displayed.
Walk Test Individual Inputs
Press b or d to scroll through the different inputs
and press f to walk test that input.
EURO 46 V10 User Manual
SMS PHONEBOOK
SMS Numbers
[01]
Mobile No. _
WALK TEST?
Walk Test Areas
[01ABCD]
Walk Test
Input 01
Walk Test Input
[01]
23