Digi Wi-Fi (Wi-Fi Module); Other Module Options; Product Information; Warranty - Pyronix ENFORCER Installation Manual

3.12 Digi Wi-Fi (Wi-Fi Module).

3.13 Other Module Options

The Enforcer has other options of , LAN, GPRS, GSM, VOICE or PSTN modules for communication. In
order to communicate with the cloud and with an ARC simultaneously, the Enforcer is also compatible
with CSL DigiAir Pyronix modules. These come in three variants of Wi-Fi, LAN and GPRS. Please refer
to the 'Modem and Communication Guide' for more information on signalling options and
programming.
Please refer to the manual provided with these modules for installation instructions.

3.14 Product Information

For electrical products sold within the European Community. At the end of the electrical
products useful life, it should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice in
your country. When disposing of the product the batteries must be removed and disposed
of separately in accordance with the local regulations

3.15 Warranty

This product is sold subject to our standard warranty against defects in workmanship for a period of
two years. In the interest of continuing improvement of quality, customer care and design, Pyronix
Ltd reserve the right to amend specifications without giving prior notice.
Enforcer: Installation Manual
DIGI-WiFi
RED LED
Single pulse: No
Cloud connection.
Single-Double
alternating pulse:
Cloud connected
Double Pulses:
when APP connected
Not Used
AMBER LED
-On at startup.
Also pulses rapidly
during network setup
procedure (steps 1 - 4)
GREEN LED
-Pulses to
indicate local
network traffic
DIGI-WiFi
Page: 14
Manual Setup
(On control panel):
1: Enter the Engineers
menu on the control panel
and then go to:
"COMMUNICATIONS? ->
Data Network Set-up? -
> Program WiFi" and
press and then .
2: Enter your router SSID
NOTE: DO NOT USE
SSIDs or passwords
with spaces [ ]
between letters and
numbers. If this is
necessary – see below
for setup using smart
devices.
2: Press and then 
again to enter your router
Password and then exit the
Engineer's menu.
NOTE: 32 Characters
MAX for SSID and
Password entry.