Pyronix PCX-256 Programming Manual page 29

PCX 256 PROGRAMMING MANUAL
Reader Is
Enter : for S/Part Control
Press the key
Enter the input(s) you would like in the 'sub-
partition'. Press the
They will appear on the bottom display of the
keypad, once you have finished entering the
required inputs press the
Dependency When
Enter : for Partition Arm
Enter : for Never
Press the key
S/Part Control By:
Enter : for Tag
Enter : for Input
Press the key
S/Part Name
Press the key
Enter the device name for the sub-partition –
which is referenced when programming tags
up in the master manager menu. At default it
is called "Device".
Assigning Tags to Sub Partitions
To assign tags to the sub-partition, enter the master manager mode and select 'Change Codes',
add a new user code (tag) and when the prompt shows "S/Part Access", enter the address of the
reader you would like the tag to operate for the sub-partitions.
Page: 28
key.
key.
RINS868-6