Install Rix; Change Inputs; Input Types; Rins868 - Pyronix PCX-256 Programming Manual

PCX 256 PROGRAMMING MANUAL
5 . 5 I n s t a l l R I X
Any Remote Input Expanders installed on the PCX system must be enabled by the 'Install RIX'
function. Please see the table on page 7 on how many RIX's can be installed on the system.

Install RIX

Using the and
'INSTALL RIX?. Press the
RIX Address
Please select the address for the RIX you are
installing and press the
RIX Installed?
Enable/Disable the RIX that you have installed.
Enter : for No (Default)
Enter : for Yes. Press the
Repeat for additional RIX's or press the
You will be returned to the Engineer Menu.
For information on how to use predictive text,
please see page: 10 for more information. Enter
the location (for engineer reference only) and
press !
5 . 6 C h a n g e I n p u t s
By default, all inputs are pre-set as 'unused' so you will need to program each individual input you
require. The input will not be 'live' (and hence cannot be walk tested) until you have exited the
Engineer Menu (please see Page: 8). Before programming, identify the location of each input from
the following tables on page 7.

5.6.1 Input Types

Number & Type
00 Unused
01 Fire
02 Gas
03 HU
04 Silent HU
05 Tamper
Page: 16
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e
I N S T A L L R I X
keys, scroll to
key
key
key
Operation
Factory default. Input is programmed out of operation.
Active at all times. Audible Response: Full (differentiated).
Communicator: 'Fire' signal
Active at all times. Audible Response: Full (differentiated)
Communicator: 'Gas' signal
Active at all times. Audible Response: Full (differentiated)
Communicator: 'Hold Up' and 'Input HU' signals
Active at all times. Audible Response: None
Communicator: 'Hold Up' and 'Input HU' signals
When disarmed: Audible Response: Internal only
key.

RINS868-6