H: Sms Commands (Gsm V9.2 Or Above Only) - Pyronix PCX 46 User Manual

H: SMS Commands (GSM V9.2 or above only)

If you have purchased the PCX 46 GSM modem (Digi-GSM), it will allow you to send the following SMS commands via a mobile phone: Arm/disarm the
system, bypass inputs, check system status, operate user automation outputs, and changing a mobile number.
NOTE: Any text message command to the PCX 46 will need to start with a valid user code and also a mobile number should be programmed.
NOTE: Text messages commands are not case sensitive except when the used outputs are activated.
NOTE: If a text messages commands is not recognised by PCX 46 it will send back to the user the wrong command.
Arming via SMS text command
Example SMS command send:
123456 Arm A
123456 Arm ABCD
NOTE: If no areas are specified then all areas will arm (default). In 'One Area' Mode, the default will be Area A.
Disarming via SMS text command
Example SMS command send:
123456 Disarm A
123456 Disarm ABCD
NOTE: If no areas are specified then all areas will disarm (default). In 'One Area' mode, the default will be Area A.
Arming with inputs bypassed via SMS text command
Example SMS command send:
123456 Arm A Bypass 4
123456 Arm A Bypass Kitchen
Bypassing inputs via SMS text command
Example SMS command send:
123456 Bypass 6
123456 Bypass Garage
NOTE: The name of the output has to be one word and spelled exactly as written in the panel. For example, Garage Door is not acceptable.
It has to be written as Garage-Door in the panel and the respective command will be Garage-Door.
Description:
123456 = User Code. Arm A = Will arm the PCX 46 in Area A.
123456 = User Code. Arm ABCD = Will arm the PCX 46 in Area ABCD.
Description:
123456 = User Code. Disarm A = Will disarm Area A.
123456 = User Code. Disarm ABCD = Will disarm the Area ABCD.
Description:
123456 = User Code. Arm A Bypass 4 = Arms Area A and will bypass input
number 4.
123456 = User Code. Arm A Bypass Kitchen = Arms Area A and will bypass
the input that is called Kitchen.
Description:
123456 = User Code. Bypass 6 = In the next arming procedure, input
number 6 will be bypassed.
123456 = User Code. Bypass Garage = In the next arming procedure, the
input called Garage will be bypassed.
Example SMS command response:
Final Arm; Area A
Final Arm; Area ABCD
Example SMS command response:
Disarm; Area A
Disarm; Area ABCD
Example SMS command response:
Input Bypass; Area A Input 04
Force Arm: Area A
Input Bypass; Area A Kitchen
Force Arm: Area A
Example SMS command response:
Input Bypass; Area A Input 06
Input Bypass; Area A Garage
9