Sms Commands - Pyronix EURO 46 APP User Manual

SMS Commands

If you have the GPRS version of the EURO 46 APP panel you can send SMS text commands via your mobile phone.
NOTE: All SMS commands must start with a valid user code and are not case sensitive unless the utilised outputs are activated.
NOTE: If an SMS command is not recognised, the panel will send an 'incorrect command' message back to you.
Setting via SMS text command
Example SMS command send:
123456 Set A
123456 Set 01ABCD
Unsetting via SMS text command
Example SMS command send:
123456 Unset A
123456 Unset ABCD
Setting with inputs omitted via SMS text command
Example SMS command send:
123456 Set A Omit 4
123456 Set A Omit Kitchen
Omitting inputs via SMS text command
Example SMS command send:
123456 Omit 6
123456 Omit Garage
(GPRS with third party SIM only)
Description:
123456 = User Code. Set A = Will set in Area A.
123456 = User Code. Set 01ABCD = Will set in Areas
01ABCD.
Description:
123456 = User Code. Unset A = Will unset in Area A.
123456 = User Code. Unset ABCD = Will unset in
Areas ABCD.
Description:
123456 = User Code. Set A Omit 4 = Sets Area A and
will omit input number 4.
123456 = User Code. Set A Omit Kitchen = Sets Area
A and will omit the input that is called Kitchen.
Description:
123456 = User Code. Omit 6 = In the next setting
procedure, input number 6 will be omitted.
123456 = User Code. Omit Garage = In the next
setting procedure, the input called Garage will be
omitted.
Example SMS command NOTE: If no areas are specified
response: then all areas will set (default). In
'One Area' Mode, the default will
Final Set; Area A
Final Set; Area 01ABCD be Area A.
Example SMS command NOTE: If no areas are specified
response: then all areas will unset (default).
Unset; Area A In 'One Area' Mode, the default
will be Area A.
Unset; Area ABCD
Example SMS command response:
Input Omit; Area A Input 04
Force Set: Area A
Input Omit; Area A Kitchen
Force Set: Area A
Example SMS NOTE: Output names have to be one
command word and spelled exactly as written in the
response: panel e.g. Garage Door is not acceptable.
It has to be written as Garage-Door in the
Input Omit; Area
panel and the respective command will
A Input 06
Input Omit; Area be Garage-Door.
A Garage
13