Walk Test; Siren Test; Start Chc Sms Update - Pyronix Enforcer 32-W User Manual

13.8 Walk Test

The 'Walk Test' function allows the testing of all programmed inputs on the wireless alarm
system.
Press b or A to scroll to 'WALK TEST'.
Press I .
Select which level set to walk test. Press
I to walk test all inputs or press the
A to walk test an input individually.
Walk Test Inputs
Walk test the mentioned inputs on the
display. After all inputs have been walk
test successfully 'walk test completed'
will be displayed.
Walk Test Individual Inputs
Press [ or ] to scroll through the
different inputs and press I to walk
test that input.

13.9 Siren Test

This function is used to test the siren and strobe outputs.
Press b or A to scroll to 'SIREN
TEST'. Press I .
This tests both the siren and strobe
outputs. Press I .

13.10 Start CHC SMS Update

This function is used in conjunction with SMS texts. It is used to communicate with the SMS
Host computer (the mobile phone server).
Press b or A keys to scroll to 'START
CHC SMS UPDATE'. Press I.
The control panel will then call the CHC.
If 'Failed CHC test' is displayed, please
call your engineer.
User Manual
Page: 21