Pyronix PCX-256 Programming Manual page 58

Enter the Arm telephone number.
Press the key.
Program PCs
Select the PC that will be used for programming.
Press the key.
'Modem Tel No' will be displayed, Enter the
telephone number of the PC that the panel will
communicate with.
Signal Alarms
Enter : for No (Default)
Enter : for Yes
Press the key.
Repeat for Signal Faults, Signal Open/Close and
Signal Access C. (All defaults are NO)
Press the key. 'Program PCs' will be
displayed. Repeat for further PCs or press the
key.
If required, enter a text password (this protects
the system from anyone dialling in – the PC
software must have this password as well)
(See page 10). Press the
Select the number of redials which the panel will
attempt (0-15). Press the
Press the key. You will be returned to the
Engineer Menu.
RINS868-6
key.
key.
PCX 256 PROGRAMMING MANUAL
Page: 57