Pyronix PCX-256 Programming Manual page 25

PCX 256 PROGRAMMING MANUAL
Assign Keypads/Readers
Using the and
KEYPADS/READERS?'
Press the key
Address
Enter the address of the keypad/reader you wish
to assign. Press the
Type
Enter : for Keypad (Default for address 00)
Enter : for Reader
Enter : for Not Used (Default for all other
addresses)
Press the key
NOTE: This function will only be displayed if
you have programmed a Reader.
Reader Is
Enter : for Arm Point (Default)
Enter : for S/Part Control
Enter : for Access Control
Enter : for Disarm Only
Press the key
Arm Point Arms / Default Level
Select the Arm Points you would like for 'arming'
the system. (or for the 'default level')
Please note the primary partitions are A,B,C & D.
Press the key. Repeat for Arm Point
Disarms and Arm Point In (if partitions are used).
Press the key.
'Arm Point Name?' will be displayed, change the
default text if required.
Page: 24
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e
A S S I G N K E Y P A D S / R E A D E R S
keys, scroll to 'ASSIGN
key
RINS868-6