Table of Contents
Advertisement
Rear view camera
The rear view camera serves to monitor the area
behind the vehicle during parking manoeuvres.
The image from the rear view camera is shown on
the PCM display.
You have the option of displaying grid lines in the
rear view camera image. These grid lines change
according to the current position of the front
wheels. They therefore show you where the cur-
rent steering wheel turn will bring you.
116
CAR
The TV sound is suppressed while the image
from the rear view camera is shown on the
display. Audio source (FM, AM, CD/DVD, AUX
and AUX BT) sound output continues uninter-
rupted.
There is no rear view camera display when the
parking brake is activated.
Voice control is not available while the image
is displayed.
Always keep the rear view camera free from
dirt, ice and snow, as these can have an ad-
verse effect on the camera image.
WARNING!
Injury hazard. The rear view camera only
serves to assist the driver. It does not replace
looking over your shoulder.
The display of objects captured by the rear
view camera is distorted.
The camera view does not cover the complete
area behind the vehicle.
û Continue to pay attention to the complete
area behind the vehicle.
Switching the rear view camera display
on/off
Switching automatic rear view camera
display on/off
If the function is activated, the rear view camera
image appears on the PCM display automatically
when reverse gear is engaged or when the rolling
back of the vehicle is detected.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET CAR
"
> "
SET parking
".
4. Select "
Rear view camera
" to activate ( ) or
deactivate ( ) the function.
Switching the rear view camera display on
manually
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET CAR
"
> "
SET parking
"
Show RVC image
> "
".
The image is shown on the PCM display.
Advertisement
Chapters
Table of Contents
