Table of Contents
Advertisement
Deleting all laps
This function can be used to delete all recordings
and reference laps.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET CAR
"
> Select "
SET sport display
".
4. "
Delete trips
".
5. Confirm the prompt that appears by selecting
Delete all
"
".
Setting the display of additional data
1. Press the w button.
2. Select i.
3. Select "
SET CAR
"
SET sport display
> "
".
4. Select "
Additional data
" to activate ( ) or
deactivate ( ) the function.
Transferring data
We recommend that you transfer and back up
the data at regular intervals.
1. Press the w button.
2. Select i.
132
CAR
3. Select "
Sport display
"
> "
Transfer data
".
A list of the stored recordings is opened.
4. Select the recording you want or the "
entry.
Transferring data via the USB interface
To USB
You can only access the "
" transmis-
sion mode if there is a USB memory stick at-
tached to the USB interface. To find out more
about the permissible USB memory media,
please refer to the section "Notes on the me-
dia supported" on page 43.
A directory called "
SportChrono
" is created on
the storage medium during data transfer.
To USB
5. Select "
".
The data is transferred, provided there is a
storage medium without write protection and
with sufficient free memory connected.
Otherwise you are notified of the problem with
the data transfer by means of an error mes-
sage.
Transferring data via the Bluetooth
interface
Please note that the connection between both
All
" list
devices must be activated for data transfer
®
using Bluetooth
. To find out how to activate
this connection, please refer to the section
®
"Switching Bluetooth
on" on page 133.
5. Select "
To Bluetooth
".
6. A list of all known devices that may be used for
a transfer of data is displayed. If the device you
want is not there, you can search for further
devices. To do this, press "
also the section "Adding a new Bluetooth
vice" on page 133).
As soon as the search is complete, a list con-
taining the devices found is displayed.
7. Select the device you want.
You may first need to authorise a new device.
To find out more, please refer to the section
"Adding a new Bluetooth
page 133.
®
New device
" (see
®
de-
®
device" on
Advertisement
Chapters
Table of Contents
