External audio source
You can use the AUX interface to connect an exter-
nal audio source that is operated on the source it-
self rather than on the PCM. Please refer to the op-
erating manual for the relevant device.
WARNING!
Accident hazard. Distraction could result in
you losing control of the vehicle.
û Operate the external audio source only
when you are safely in control of your vehi-
cle and traffic conditions permit. If in doubt,
stop the vehicle and operate the external
audio source while the vehicle is parked.
Calling up an external audio source
û Press the n button repeatedly until the
AUX
"
" audio source is highlighted in the bot-
tom line.
Activating the interface
AUX jack
To be able to select a connected external audio
source with the n button, the interface must
be activated in the SET menu.
1. Press the n button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET DISC / AUX
".
You will only be able to access the "
SET DISC /
AUX
" menu if there is at least one CD/DVD in-
serted or at least one audio source activated
( ) in the menu.
4. Select "
AUX
" to activate ( ) or deactivate ( )
the function.
Adapting the volume for an external audio
source
Volume control should mainly be performed
on the external audio source to avoid large dif-
ferences in volume (particularly increases)
when changing the audio source.
Recommendation:
û Set the maximum volume on the external
audio source.
û Then set the volume you want on the PCM.
You can also adapt the volume of the external
audio source to the volume of the PCM.
DISC
47