Call Waiting - Porsche PCM3.1 Operating Manual

1. Select " New call
" in the call menu.
2. You then have the following options for enter-
ing the telephone number:
Dial number
– " ":
The input menu for telephone numbers is
opened. Please refer to the section "Dialling
a number" on page 60.
Phonebook
– " ":
You can insert a number stored in the phone-
book. To find out more, please refer to the
section "Calling a phonebook entry" on
page 61.
– " Previous calls ":
You can insert a telephone number from the
list of previous calls. To find out more,
please refer to the section "Calling a number
from the list of previous calls" on page 61.
Received calls
– " ":
You can insert a telephone number from the
list of received calls. To find out more,
please refer to the section "Calling a number
from the list of received calls" on page 62.
The original call is held while the new connection
is established.
You can switch between the two calls or establish
a conference call. To find out more, please refer
to the section "Call waiting (swapping) and confer-
ence" on page 65.
64
PHONE

Call waiting

Call waiting
The " " function is only available if sup-
ported by the network provider and by the mobile
phone.
Call waiting
The " " function must also be activated
in the call settings of the mobile phone. To find out
more, please refer also to the section "Call waiting
(swapping) and conference" on page 65.
Rejecting a waiting call
If you receive another call while there is already
one active, you will hear a call waiting tone.
The menu for the incoming call is displayed and a
message appears in the bottom line.
û Select "
Reject ".
The waiting call is rejected. The caller hears a
busy signal.
If the caller's telephone number is transmitted,
the number or name appears in the " Received
calls
" list.
Accepting a waiting call
û Select "
Answer
".
The waiting call is accepted and activated. The
previously active call is put on hold.
You then have the option to switch between the
two calls or to establish a conference with both
callers. To find out more, please refer to the
section "Call waiting (swapping) and confer-
ence".
The PCM will not accept a third incoming call.
The caller hears a busy signal or is redirected to
the mailbox.
Ending a connected call
û Select "
End connected call ".
The currently active call is ended and the first
call that is on hold is activated again.