Phonebook Settings; Setting Visibility; Finding The Cordless Handset; Setting The Memory For The Phonebook - Porsche PCM3.1 Operating Manual

Setting visibility

To ensure that your PCM can be connected to oth-
®
er devices via the Bluetooth interface, it must be
"visible" (=recognisable) for other devices during
the connection operation.
To increase security, you can deactivate visibility
of the PCM after the connection operation.
To prevent further unwanted connection requests,
you can deactivate visibility of the PCM after the
connection operation.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET PHONE
"
> " Bluetooth settings ".
> Select " PCM visible " to activate ( ) or
deactivate ( ) visibility of the PCM.
98
PHONE

Finding the cordless handset

This function starts the search for the cordless
handset.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET PHONE
"
> " Bluetooth settings "
> " Find handset ".
The search is started. If the handset has
been found and is not in the charging cra-
dle, it will ring in confirmation and to help
you locate it in the vehicle.

Phonebook settings

Setting the memory for the phonebook

You can set whether the phonebook entries on the
SIM card, the phonebook entries in the telephone
memory and/or the vCards stored in the PCM
should be used for the display in the phonebook.
This allows you to adapt the phonebook list of the
PCM to your list in the mobile phone.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET PHONE "

Phonebook settings

> " "
> " Phonebook memory ".
4. Make the setting you want by selecting it.

If the transfer of the phonebook data from
your mobile phone to the PCM fails, it may be
because your mobile phone is working with
security mechanisms that affect transfer us-
ing the "Phone Book Access Profile" (PBAP).
>>>