Setting Wiper Options - Porsche PCM3.1 Operating Manual

Setting the alignment for the low beam
You can set the alignment of the low beam head-
lights for driving on the right or left.
You can only change this function when the vehicle
is stationary.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET CAR "
> " Vehicle functions "
Light & visibility
> " "
> " Exterior lights "
> " Low beams ".
4. Select " Standard
" to adapt the headlights to
the normal direction of traffic in the delivery
country.
- or -
4 Select " Inverted " to adapt the headlights to the
other direction of traffic.
Setting the orientation light
The orientation lighting include the lights in the
area of the roof console, the inner door handles
and the storage compartments.
You can set the intensity of the orientation light on
a scale from 0 to 10.
136
CAR
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET CAR
"
> " Vehicle functions "
> " Light & visibility "
> " Interior lights "
Orientation light
> " ".
4. Set the intensity you want by touching the two
symbols and or by turning the right ro-
tary knob t .
The setting is immediately applied.
Setting the fade-out time for the interior
lights of the vehicle
You can set a fade-out time of between 0 and
300 seconds for your vehicle's interior lights.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET CAR "
Vehicle functions
> " "
Light & visibility
> " "
> " Interior lights "
> " Fade-out time ".
4. Set the time period you want by touching the
two symbols and or by turning the right
rotary knob .
t
The setting is immediately applied.

Setting wiper options

You can choose whether you want to switch on
your vehicle's windscreen wipers yourself or
whether they should be controlled automatically.
Setting activation of the rain sensor
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET CAR
"
> " Vehicle functions "
> " Light & visibility "
Wiper
> " "
Rain sensor
> " ".
4. Select " Automatic " if the rain sensor is to be
permanently active as soon as the wiper
switch is set to intermittent mode.
- or -
4 Select " Manual " if the rain sensor is to be
started manually.