Porsche PCM3.1 Operating Manual page 193

Setting 3D display
If this function is activated, a three-dimensional
map view is shown.
You can activate and deactivate the function using
the "activate birds eye view" and "deactivate birds
eye view" commands.
Displaying traffic messages
When this function is activated, traffic information
is also shown in the map view.
Activate and deactivate the function using the "ac-
tivate show traffic" and "deactivate show traffic"
commands.
Setting autozoom
If you have activated this function, the entire cur-
rent route section is displayed.
Activate and deactivate the function using the "ac-
tivate autozoom" and "deactivate autozoom" com-
mands.
Setting the map orientation
You can change the orientation of the map using
the following commands:
– "activate north orientation",
– "deactivate north orientation",
– "show destination" and
– "show location".
Repeating a navigation announcement
If you say the "guidance announcement" com-
mand during active route guidance, the last navi-
gation announcement is repeated.
193
Voice control