Table of Contents
Advertisement
Setting the Traffic prog. volume
The traffic programme volume refers to the vol-
ume at which the traffic programme announce-
ments are output.
It specifies the minimum volume as a function of
the volume of the audio source currently selected.
1. Press the b button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
Traffic prog.
".
4. Make the setting you want on the scale by
touching the two symbols
and
Making settings for radio mode
Switching RDS on/off
The PCM is capable of receiving RDS signals (RDS
= Radio Data System) in FM mode. It supports the
following functions:
– station name,
– programme type (PTY),
– traffic programme,
– radio text as well as
.
– detection of alternative frequencies.
(Radio stations transmit programmes with the
same programme content on different frequen-
cies in different regions.)
You can switch tracking of these alternative fre-
quencies on or off in the Set menu.
1. Press the m button repeatedly until
"
FM
" is highlighted.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET FM
".
4. Select "
RDS
" to activate ( ) or deactivate ( )
the function.
Switching regionalisation on/off
When RDS (tracking of the alternative frequencies)
is active, regionalisation can additionally be
switched on or off.
If stations have a station chain with varying region-
al programme contents, switching on regionalisa-
tion prevents switching between the different sta-
tions.
1. Press the m button repeatedly until
"
FM
" is highlighted.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET FM
".
4. Select "
Regional
" to activate ( ) or
deactivate ( ) the function.
Switching RDS radio text on/off
1. Press the m button repeatedly until
"
FM
" is highlighted.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET FM
".
4. Select "
Radio text
" to activate ( ) or
deactivate ( ) the function.
TUNER
25
Advertisement
Chapters
Table of Contents
