Showing The Information Window; Video Text - Porsche PCM3.1 Operating Manual

Showing the information window

û Press the right rotary knob
r while in TV
mode.
The information window is called up together
with the " Station list " menu item.
While for digital programmes it shows details
about the programme currently active, for ana-
logue programmes the information window only
contains the name of the station plus the current
time.

The various information can, however, only be
displayed if the relevant signal is being broad-
cast by the station.

Video text

Calling up video text
1. Press the m button repeatedly until
the " TV " mode is highlighted in the bottom line.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Video text ".
The video text display appears. When called up
for the first time, the programme page "100"
is shown.

Not all stations transmit a video text signal.
Selecting a video text page
1. Touching the display opens a bar for entering
the numbers directly.
2. Touch the appropriate digits on the display.
After the third digit is entered, the video text
search begins and the video text page is
shown. The bar for entering numbers is hid-
den.
 If the " Video text via TV " function is activated,
the video text picture is overlaid onto that of
the TV programme. To find out more, please
refer to the section "Placing video text over
the TV picture" on page 30.
Zooming into a video text page
û Call up an enlarged view of the upper half of the
display by turning the right rotary knob q.
Turn the knob again to switch to an enlarged
view of the lower half of the display.
û Turn once more to return to the normal page
view.
TUNER
29