Operating The Pcm Telephone; Inserting The Sim Card In The Pcm - Porsche PCM3.1 Operating Manual

Operating the PCM telephone

A SIM card is required if you want to use the inter-
nal PCM telephone in telephone mode. You can
– insert the SIM card in the slot provided under
the display or
– connect a suitable mobile phone to the PCM
®
via Bluetooth .
To find out more, please refer to the sections
®
"Connecting an authorised Bluetooth device with
the PCM" on page 96 and "Adding a new Blue-
®
tooth device" on page 97.

Please note that your mobile phone must sup-
®
port the Bluetooth Hands-Free Profile or the
®
Bluetooth SIM Access Profile for use with
the PCM telephone.
72
PHONE

Inserting the SIM card in the PCM

û Push the SIM card (SIM = Subscriber Identifica-
tion Module) into the slot provided until it en-
gages.
To remove the SIM card, press the card into
the slot again until it stops.
Insert the SIM card so that the metal contacts are
on the underside. The slanted corner of the SIM
card must be on the rear left.

The use of twin SIM cards, for example in the
mobile phone and the internal PCM telephone
(both cards active at the same time), may im-
pair the telephone functions.
For more information on this, contact your
network provider.
If there is no SIM card inserted in the slot, the PCM
automatically attempts to establish a Bluetooth
connection with a mobile phone. However, this is
only possible if you have
®
– activated Bluetooth on the PCM and on the
mobile phone and
– authorised at least one mobile phone on the
PCM.
If you have not yet authorised a mobile phone on
Find telephone
the PCM, you can select "
the PCM search for and authorise your mobile
phone. Follow the instructions on the display.
You can find more information in the sections "Au-
®
thorised Bluetooth devices" on page 95 and
®
"Adding a new Bluetooth device" on page 97.
®
" to have