Device - Porsche PCM3.1 Operating Manual

Displaying details for the authorised
®
Bluetooth

device

1. Open the list of authorised Bluetooth
es.
2. Select any device in the list.
3. Select " Device details
".
The following information is displayed:
– the device name,
®
– the Bluetooth address,
– the connection quality as well as
– the supported services.
68
PHONE
Adding a new Bluetooth
For the PCM to find your Bluetooth
please ensure that the Bluetooth
device has been activated and set to "visible".
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
> Select " Bluetooth settings
> " New device ".
A search is started and a list of the devic-
es found is displayed.
3. Choose the device you want by selecting it in
the list.
®
A Bluetooth code is displayed that you must
®
devic-
enter in the corresponding Bluetooth
Once you have entered the code, successful
authorisation of the device is shown on the dis-
play.
4. The connection is automatically established by
the PCM.
®
device 
With some mobile phones, the connection re-
quest by the PCM must be explicitly confirmed
®
device,
on the mobile phone. This may even have to
®
function on the
be done a number of times in some cases,
for example before transferring the phone-
book. To avoid this request, you can authorise
the PCM in your mobile phone's list of devic-
es. The connection will then be established
automatically in the future, without the need
".
for further checks.
It can take a few seconds for the Bluetooth
device to be authorised.
If the list of authorised Bluetooth
full (max. 5 mobile phones), you must first de-
lete a device from the list. An appropriate
message will be displayed. To find out more,
®
device.
please refer to the section "Deleting an au-
thorised Bluetooth
page 67.
®
®
devices is
®
device from the list" on