Table of Contents
Advertisement
4. Select one of the two available menu items:
– Automatic
The PCM automatically selects the mobile
phone network of the SIM card that is logged
in.
If this network is not found (e.g. when
abroad), the network of a roaming partner is
automatically selected.
–
Manual
If you select
Manual
, the PCM telephone
searches for the currently available net-
works, from which you can choose the mo-
bile phone network you want to use.
If a manually selected network is lost for more
than 10 seconds, the system switches to au-
tomatic network selection.
Displaying the IMEI
The IMEI (International Mobile Equipment Identity)
is a serial number that permits unique identifica-
tion of the hardware in mobile radio equipment.
This number allows different network providers to
block the telephone in the event of misuse.
92
PHONE
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PHONE
"
> "
Telephone settings
"
> "
IMEI
".
The device number is displayed.
Switching 3-way calling on/off
Problems may occur with 3-way calling on the
PCM as these functions are not correctly support-
ed by all mobile phones and telephone networks
(in particular CDMA networks).
It is recommended that 3-way calling be switched
off in such cases in order to ensure reliable tele-
phone operation.
This function is only available if your mobile
phone is connected to the PCM using the
Hands-Free Profile.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PHONE
"
Telephone settings
> "
".
3-way calling
4. Select "
" to activate ( ) or
deactivate ( ) the function.
SIM settings
This function is only available with the SIM
card inserted or with a connection using the
SIM Access Profile.
Changing the PIN
This function allows you to change the PIN of your
SIM card.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET PHONE
"
> "
SIM settings
"
Change PIN
> "
".
The input menu for PIN entry is displayed.
You must start by entering the current
PIN.
4. Enter the current PIN by selecting the buttons
on the keypad shown and confirm your entry
by selecting "
OK
".
You are then prompted to enter the new PIN.
Advertisement
Chapters
Table of Contents
