Table of Contents
Advertisement
Accepting vCards
If you save the vCard, the following data is ac-
cepted:
– the telephone numbers contained in the
phonebook as well as
– the addresses in the personal destination
memory in the navigation menu.
To find out more, please refer also to the
section "Personal destination memory" on
page 146.
Accepting a single vCard
1. Press the c button.
2. Select "
Messages
".
3. Open the relevant vCard by selecting it.
4. Select "
Accept
".
The details of the vCard are checked.
5. Confirm the acceptance of the valid addresses
and telephone numbers by selecting "
Accepting all vCards
1. Press the c button.
2. Select "
Messages
".
3. Open the relevant vCard by selecting it.
88
PHONE
4. Select "
Accept all
".
5. Select "
Accept all
" again to confirm the prompt
that appears.
The details of the vCards are checked and the
valid addresses and telephone numbers are
accepted.
Editing vCard details
The addresses and telephone numbers contained
on a vCard are listed in the vCard details. The fol-
lowing symbols are used:
Details are correct and are accepted when
the vCard is saved.
Details are correct, but are not accepted
when the vCard is saved. An appropriate
message will be displayed.
Details are not correct and can be
?
OK
".
changed or entered again if necessary.
The procedure for editing details is described be-
low using address data as an example.
1. Press the c button.
2. Select "
Messages
".
3. Open the relevant vCard by selecting it.
4. Select "
Addresses
".
The addresses are checked.
5. Select the address with the "?" symbol.
The address is checked again. A search for
similar addresses is performed.
If similar addresses are found, these are listed
after the check is completed.
Inserting and editing a similar address
6. Select a similar address from the list.
Edit
7. Select "
" if applicable and make the chang-
es you want in the address input menu.
8. Select "
Accept
".
After selecting "
Accept
", the address can no
longer be edited.
Advertisement
Chapters
Table of Contents
