Establishing A Connection From An External Bluetooth; Setting Visibility; Device - Porsche PCM3.1 Operating Manual

Establishing a connection from an
®
external Bluetooth

device

If the PCM does not find your mobile phone or a
connection attempt by the PCM fails, you can also
start the authorisation from the mobile phone.
1. If another mobile phone is connected with the
®
PCM, switch off Bluetooth on the connected
mobile phone to disconnect the connection
with the PCM.
2. Press the c button.
3. Press the i button or touch the tab of
the same name in the header.
The PCM is now visible for external devices.
®

Please ensure that the Bluetooth visibility of
the PCM is activated. To find out more, please
see the following section.
4. Using the mobile phone, search for audio ac-
cessories or devices that support Bluetooth
Refer to the manufacturer's operating instruc-
tions to find out how to do this.
5. Select the device "PCM" from the mobile
phone's search results and establish a connec-
tion.
Refer to the manufacturer's operating instruc-
tions to find out how to do this.
6. A request appears on the PCM display.
Select " Accept ".
7. A keypad appears where you enter a four-digit
®
Bluetooth code of your choice and confirm
with " OK ".
®
8. Enter the same Bluetooth code on your mo-
bile phone.
Once you have entered the code, successful
authorisation of the device is shown on the dis-
play.
9. With many mobile phones, the connection with
the PCM must be explicitly established from
the mobile phone following authorisation. Fur-
ther details can be found in the operating man-
ual for your mobile phone.

With some mobile phones, the Bluetooth
code must be directly provided by the mobile
phone during the connection request. If this is
the case, enter a 4-digit code of your choice
®
.
on your mobile phone and confirm it with OK.
You will then be shown a keypad on the PCM
display where you must enter the same code
and confirm it.

Setting visibility

To ensure that your PCM can be found by other de-
®
vices via the Bluetooth interface, it must be "vis-
ible" (=recognisable) for other devices during the
search.
To prevent further unwanted connection requests,
you can deactivate visibility of the PCM after the
connection operation.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Bluetooth settings ".
4. Select " PCM visible " to activate ( ) or
deactivate ( ) visibility of the PCM.
®
69
PHONE