Switching The "Call Waiting" Function On/Off - Porsche PCM3.1 Operating Manual

4. Select one of the following settings for call for-
warding:
– Divert all
activates call forwarding for all incoming
calls.
Busy
–
activates call forwarding for calls that come
in while you are on another call.
To be able to activate call forwarding with the
" Busy " setting, the " Call waiting " function
must be switched off first.
– No answer
activates call forwarding for calls that you
cannot or do not want to accept. The call is
forwarded to the entered number after a cer-
tain time.
– Cannot be reached
activates call forwarding for calls that come
in while the telephone is switched off or is
not ready to receive calls.
– Cancel all
deactivates all call diversions at once. The
telephone numbers entered for the individual
call diversions remain saved in the network
and are displayed again the next time call
forwarding is activated.
94
PHONE
5. Select " Switch on
".
The input menu is opened.
6. Enter the telephone number you want for the
call diversion and confirm your entry by select-
ing " OK ".
- or -
Select " Phonebook ".
Phonebook
After selecting you can select a
number from the phonebook. The call is then
diverted to this number.
7. If you set the " No answer
" call diversion type,
you also need to set the delay after which the
calls are to be diverted.
Delay
Select " ".
Set the delay you want by selecting it in the list
that appears.
The relevant call diversion is then activated
and the settings are shown on the display.
Checking the status of the call diversion
1. Select the type of call forwarding you want.
2. Select " Check status ".
The current status is then queried in the net-
work and shown on the display after a few sec-
onds.
Deactivating call forwarding
1. Select the type of call forwarding you want.
2. Select " Switch off ".
The corresponding call diversion is deactivat-
ed.
Switching the "Call waiting" function on/
off
Call waiting
If the " " function is activated, an incom-
ing call will be indicated during an active call.
The caller hears a ringing tone.
1. Press the c button.
2. Press the i button or touch the tab of
the same name in the header.
1. Select " SET PHONE "
> " Call settings "
> " Call waiting ".
2. Select one of the following options:
– Select " Switch on " to activate the function.
– Select " Switch off " to deactivate the func-
tion.
– Select " Check status " if the current status is
unknown and should be queried in the net-
work.
The current status will be displayed in the in-
formation area as soon as the query is an-
swered.