Table of Contents
Advertisement
Extended memory
In the PCM menu you have the option to store var-
ious settings for up to three of your vehicle's igni-
tion keys and two of your vehicle's memory but-
tons. Both driver-related settings from the instru-
ment cluster as well as PCM settings are stored in
this process.
The following PCM settings are stored:
– the personal data fields of the trip data in the
w main menu,
– the stations stored on the station buttons of
the various preset memories in radio mode,
– the sound settings for the various audio sourc-
es,
– the volume settings for the various audio
sources,
– settings for the map view as well as
– the settings for voice control.
The vehicle-dependent settings are described in
the following sections.
To find out more about the extended memory,
please refer also to the corresponding chapter in
the owner's manual.
The range of vehicle settings available in the
PCM depends on the vehicle type and the
equipment installed.
Setting light options
Setting the daytime running lights
Daytime Run. Lights
If the "
" function is active ( ),
the lights will always be switched on when the en-
gine is running. This applies regardless of the light
switch setting.
The illumination of the instruments and switches is
still switched on and off via the light switch, re-
Daytime Run. Lights
gardless of the "
" setting.
This function is only available in countries where
daytime running lights are not mandatory.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET CAR
"
> "
Vehicle functions
"
Light & visibility
> "
"
> "
Exterior lights
".
4. Select "
Daytime Run. Lights
" to activate ( ) or
deactivate ( ) the function.
Setting the fade-out time for the exterior
lights of the vehicle
You can set a fade-out time of between 10 and
120 seconds for your vehicle's exterior lights.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET CAR
"
> "
Vehicle functions
"
> "
Light & visibility
"
Exterior lights
> "
"
> "
Fade-out time
".
4. Set the time period you want by touching the
two symbols
and
or by turning the right
rotary knob
t
.
The setting is immediately applied.
Fade-out time
The "
" setting also changes the illu-
mination duration when unlocking the vehicle.
To find out more about this, please refer to the
chapter "Welcome home function" in the owner's
manual.
CAR
135
Advertisement
Chapters
Table of Contents
