Porsche PCM3.1 Operating Manual page 162

Map view during trace recording
During trace recording, the recorded route of the
trace is shown as a blue line in the map view.
Map view when following a trace
When you drive a recorded trace, the route ahead
is shown in the map in orange and the route al-
ready covered is shown in grey.
162
NAVI
Starting recording
1. When off-road navigation is activated, press
the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET NAVI "
> " Off-road "
> " Record trace ".
From start point
4. Select " " if you want to start re-
cording from the start of the journey. Trace re-
cording is continued, starting from the current
point. The data automatically stored from the
beginning of the journey is transferred.
- or -
From current position
Select " " if you want to
start recording from the current position. The
data automatically stored from the beginning
of the journey is deleted.
If you have already recorded a trace during the
trip, deleted the trace or changed the grid for set-
ting the navigation points, you will only be able to
From current posi-
record a new trace using the "
tion " function.
 Record trace
You can also access the "
" End trace " functions in the option menu in the
map view when off-road navigation is activat-
ed.
Ending trace recording
1. Press the f button while recording is un-
derway.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET NAVI "
> " Off-road "
> " End trace ".
Storing a recording
As soon as you end a trace recording you are
asked whether this trace should be stored in the
destination memory.
1. Confirm the prompt that appears by selecting
" Yes ".
2. The input menu is opened. A suggestion for a
name is already provided in the input field.
3. Change the suggested name as you want and
confirm your entry by selecting "
" and
OK ".